A.G.E.
-
MD350 Carbide Tipped Keyhole 3/8 Dia x 3/8 x 1/4 Inch ShankCloseMD350 Carbide Tipped Keyhole 3/8 Dia x 3/8 x 1/4 Inch Shank
Cut perfectly fitted tongue-and-groove joints on stock between 5/8" and 3/4" thick with a table-mounted router and this assembly.
View Product Add to Cart
MD354 Carbide Tipped Ogee Raised Panel 7/8 Radius x 3-1/2 Dia x 1/2 x 1/2 Inch ShankCloseMD354 Carbide Tipped Ogee Raised Panel 7/8 Radius x 3-1/2 Dia x 1/2 x 1/2 Inch Shank
Create raised panels for cabinet doors, frame-and-panel furniture, and architectural paneling with this raised-panel bit.
View Product Add to Cart
MD356 Carbide Tipped Traditional Raised Panel 15 Deg x 3-1/2 Dia x 1/2 x 1/2 Inch ShankCloseMD356 Carbide Tipped Traditional Raised Panel 15 Deg x 3-1/2 Dia x 1/2 x 1/2 Inch Shank
Create raised panels for cabinet doors, frame-and-panel furniture, and architectural paneling with this raised-panel bit.
View Product Add to Cart
MD358 Carbide Tipped Ogee Raised Panel with back cutter 7/8 Radius x 3-3/8 Dia x 1-3/16 x 1/2 Inch ShankCloseMD358 Carbide Tipped Ogee Raised Panel with back cutter 7/8 Radius x 3-3/8 Dia x 1-3/16 x 1/2 Inch Shank
Create raised panels for cabinet doors, frame-and-panel furniture, and architectural paneling with this raised-panel bit.
View Product Add to Cart
CloseMD360 Carbide Tipped 2-Piece Concave Stile and Rail 1-5/8 Dia x 1 x 1/4 Radius x 1/2 Inch Shank Set
Our stile and rail sets give you two complete bits, one for doing the rail cuts, one for the stiles.…
MD360 Carbide Tipped 2-Piece Concave Stile and Rail 1-5/8 Dia x 1 x 1/4 Radius x 1/2 Inch Shank SetMD360 Carbide Tipped 2-Piece Concave Stile and Rail 1-5/8 Dia x 1 x 1/4 Radius x 1/2 Inch Shank Set
$128.84View Product Add to Cart
CloseMD362 Carbide Tipped 2-Piece Ogee Stile and Rail 1-5/8 Dia x 1 x 13/64 Radius x 1/2 Inch Shank Set
Our stile and rail sets give you two complete bits, one for doing the rail cuts, one for the stiles.…
MD362 Carbide Tipped 2-Piece Ogee Stile and Rail 1-5/8 Dia x 1 x 13/64 Radius x 1/2 Inch Shank SetMD362 Carbide Tipped 2-Piece Ogee Stile and Rail 1-5/8 Dia x 1 x 13/64 Radius x 1/2 Inch Shank Set
$128.84View Product Add to Cart
CloseMD370 Carbide Tipped Lock Miter 45 Deg x 2-3/4 Dia x 1-1/4 x 1/2 Inch Shank for 1/2 - 7/8 Material
MD370 Carbide Tipped Lock Miter 45 Deg x 2-3/4 Dia x 1-1/4 x 1/2 Inch Shank for 1/2 – 7/8 MaterialMD370 Carbide Tipped Lock Miter 45 Deg x 2-3/4 Dia x 1-1/4 x 1/2 Inch Shank for 1/2 – 7/8 Material
$145.11View Product Add to Cart
MD372 Carbide Tipped Reversible Ogee Window Sash & Rail 1/8 Radius x 1-3/8 Dia x 1-13/16 x 1/2 Inch Shank with Center Ball BearingCloseMD372 Carbide Tipped Reversible Ogee Window Sash & Rail 1/8 Radius x 1-3/8 Dia x 1-13/16 x 1/2 Inch Shank with Center Ball Bearing
This reversible assembly is designed to cut window sash and glass door parts, including rails, stiles, mullions and muntins, on…
View Product Add to Cart
MD374 Carbide Tipped Base Molding Ogee Edge Detail 5/16 x 3/8 Radius x 1-7/16 Dia x 19/32 x 1/2 Inch ShankCloseMD374 Carbide Tipped Base Molding Ogee Edge Detail 5/16 x 3/8 Radius x 1-7/16 Dia x 19/32 x 1/2 Inch Shank
Cut decorative ‘V’ grooves and lettering on signs with these ‘V’ Groove bits. Use with an edge guide to chamfer…
View Product Add to Cart
MD5-505 Carbide Tipped Thin Walled Aluminum and Non-Ferrous Metals 5-3/8 Inch Dia x 50T TCG -5 Deg 20mm Bore Circular Saw BladeCloseMD5-505 Carbide Tipped Thin Walled Aluminum and Non-Ferrous Metals 5-3/8 Inch Dia x 50T TCG -5 Deg 20mm Bore Circular Saw Blade
Designed specifically for cutting relatively thin walled (less than 1/4" thick) aluminum and non-ferrous extrusions and frames. Use a coolant…
View Product Add to Cart
MD500 3-Piece Ogee Raised Panel Door Making 1/2 Inch Shank with Ball Bearing Set for 3/4 – 7/8 MaterialCloseMD500 3-Piece Ogee Raised Panel Door Making 1/2 Inch Shank with Ball Bearing Set for 3/4 - 7/8 Material
This 3-piece set combines the 2-piece Stile & Rail cutters with one Horizontal Raised Panel bit. The easy-to-use set, produced…
View Product Add to Cart
MD502 3-Piece Ogee Raised Panel Door Making 1/2 Inch Shank with Ball Bearing Set with Back Cutter for 3/4 – 7/8 MaterialCloseMD502 3-Piece Ogee Raised Panel Door Making 1/2 Inch Shank with Ball Bearing Set with Back Cutter for 3/4 - 7/8 Material
This 3-piece set combines the 2-piece Stile & Rail cutters with one Horizontal Raised Panel bit with back cutter. The…
Copyright © 2024 All Rights Reserved | CanCam Industrial CNC | Legal Disclaimer | Refund Policy | Privacy Policy